Our standard 700 Series – the heart of Ever-Power acceleration reducer products – has been serving industry reliably for over a decade. Its proven modular style has set the industry standard for overall performance and is the most imitated item in the current worm gear acceleration reducer marketplace. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes have earned a status to be a business benchmark worldwide. Our success originated from our relentless drive for quality with state-of-the-art technology, all and will be offering worm gearboxes are inexpensive prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and motor interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low quickness gear ratio. Being basic and compact in style, these gears can achieve higher gear ratio compared to the helical gears. These worm decrease gears having screw type characteristics are similar to helical gears, but its helix position is typically comparatively bigger) and its own body is generally quite long in the axial path. The gears in these gearboxes can be correct or left-handed depending upon the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (single or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is shaped such as a screw and the worm wheel is a kind of gear machined to possess a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is the same as a nut that has been fixed so that it cannot rotate and for that reason progresses in the axial direction when the bolt can be turned.
The design of a worm gear is considered through the relationship between the rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. For this reason, in a 1 speed reduction gears, the wheel can be manufactured so that it will be rotated 1/60 (1/120 in special applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This feature makes it possible to layout the turning transmission direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). You’ll be able to change the rotation path of the worm wheel by changing the screw direction.
A wide variety of shaft layouts The wide variety of shaft layouts is one of the top features of interlocking gears.For example, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Figure 2) and, if attachment orientations are included, it is possible to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is characteristic since the contact is certainly linear and the relative slide is great. In comparison with rolling power transmission, sound and vibration are really low. For this reason, this technology is used to drive medical equipment, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when selecting a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in important areas such as selecting the strain index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When using a worm reduction gears, heat produced through the initial period of use is high and running-in procedure at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is paramount to sufficiently achieving the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in operation (approximately 50 hours), it’s important to change the lubricating oil and to change the lubricating oil after that about 1 time per year according to the procedure manual provided by the manufacturer.
Product Description
The Worm Reduction Gear Box is supplied by our company is of supreme quality. Our products are created through the use of premium quality materials and progress technology at our vendors end. These are widely used in various sectors. Our items are often available at an extremely low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Body, Flange Mount.
Option B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and safe operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the market worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute flexibility is given by the wide choice of several mounting options, shaft configurations and electric motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also add up, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, featuring a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) offers great versatility to suit a broad selection of applications and provides higher efficiency than the compact range XC, where in fact the emphasis is on space effectiveness.
Series H offers the same features as series X with an extra plus: a spur gear pre-stage at the insight end provides higher performance and a broader range of ratios than the X series.
Framework sizes 110 and 90 feature a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
Broad range of possibilities:
second input, output flange, single or dual extension output shaft, torque limiter with through cable, torque arm.