Right Position Miter Gearbox Standard Features
Dimensions: right angle miter equipment drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft can be utilized as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened steel ball bearings, long term lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: 3 shaft connections are given for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated at 1/3 HP at 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and Cost Savings
Longer service life
Less wear
Greater tooth-to-tooth contact
Quieter operation
The most efficient power transfer design under rated load conditions
Custom Options
Stainless shaft (Make sure you specify series stainless needed)
Longer shafts lengths on input and output
2:1 Ratio
Right Angle Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with noiseless, reliable spiral bevel gears. These high quality bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-steel shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting choices. The fully enclosed design ensures the integrity of the internal gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Method Gearboxes are made for maximum strength and heat dissipation. The drives are available with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts aswell, including:
Squared
Splined
Extended
Shortened
Stepped
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in hundreds of applications. Any make use of that demands the dependable transfer of swiftness or power, you could find a two-way gearbox bearing the Ever-Power brand. The small design of Ever-Power Two-Way Right-Angle Gearboxes makes them well suited for applications such as:
Food Processing Equipment
Ovens & Dryers
Tumbling Barrels
Power Transmission Equipment
Register Controls
Stokers
Case Openers
Paper Rewinders
Test Equipment
Ever-Power Inc, providing the most reliable and reliable transfer of power on the market. Our company is well known for its innovative designs and producing high-quality movement control solutions created for engineered efficiency and durability. We provide a range of gearbox designs and a wide selection of flexible shaft couplings to provide you with a total solutions for your mechanical and power transmission applications.
Right Angle Gearbox
Correct angle gearboxes are seen as a the actual fact that the drive shaft and the result shaft are organized at an angle of 90 degrees. Based on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results in an axis offset.
Correct angle gearboxes are recognized with various kinds of gear teeth or a mixture of different gearing types. The most popular single-stage gearbox types are bevel and worm.
Due to the high one stage ratios and the reduced effectiveness level, worm gears can perform a self-locking effect. With worm gears it is also possible to get a hollow shaft as the drive shaft.
Bevel gearboxes include different types of gearing. Bevel gearboxes with intersecting axes are noticed using bevel gearing with straight, helical or spiral tooth. Hypoid gearboxes have helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage could be realized is larger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes may also be combined with other gearbox types. A regular app in this respect is the mixture with a planetary gearbox, whereby the planetary gearbox can be connected upstream or downstream. This outcomes in a wide selection of overall multiplication elements and wide range of uses in lots of industrial applications.
The efficiency level of bevel gearboxes is typically lower than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. That is because the bevel gear stage generates a high degree of axial force and radial power, which needs to be absorbed by suitable bearings. This escalates the power reduction, which is particularly notable in the drive stage of the gearbox.
The operating noise and the transmittable torques of classic bevel gearboxes are also less than with single spur gear teeth. Hypoid gearboxes, however, are incredibly noisy and will transmit huge amounts of torque, but a great deal of bearing load happens in the bevel gear stage of the gearboxes.
In summarizing, a right angle gearbox is always used when the quantity of installation space in the application form is bound, or an angular arrangement between your drive and the output is necessary by the application. Also, they are used in cases where in fact the input shaft must be hollow in order to lead through lines or use clamping sets.
The advantages of right angle gearboxes:
Use when installation space is limited
Compact design
Can be coupled with other types of gearbox
Quiet and high amount of torque when using hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Complex design
Lower performance level than planetary gearbox
Noisier
Decrease torques in single-stage ratio range
The Ever-Power, the initial right angle gearbox drive, is more popular and is used worldwide. The Ever-Power provides manual or power transmitting of rotary motion in a COMPACT, standardized right angle unit.
Our standard line of bevel gearboxes are available from stock in both an ” and Metric Series, one or dual output shafts, 1:1 or 2 2:1 ratios, and grease lubricated for life and also have an operating temperature selection of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Utilizing carburized case-hardened Coniflex* bevel gears, all Ever-Power units employ completely enclosed & sealed ball bearings.
The cast aluminum housings on our 90 level gearboxes are precision machined, upon our CNC machining center and then coated with a chemical film to safeguard the material, and use flanged ends and side bosses for compact installation in a wide selection of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless. On the two 2:1 versions, the pinion shaft is usually carbon metal. For the sizes 4 & 5, the materials is dark oxide carbon metal. Shafts can be provided with particular extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to your standard versions, we will modify our units to meet your design specifications! Our sales and engineering departments will be ready to aid you with your specific application requirements.
Through the years we’ve received questions about nearly every aspect of the gearbox selection process. One of the questions we’ve had several times is, “Exactly what is a right-angle gearbox or a right-position drive?” Or, more particularly, “How is a right-position gearbox or drive not the same as a swiftness reducer or other styles of gearboxes?”
gear-speed-reducer-1-2.png
First, let’s start with some basic terminology. It is not uncommon for the conditions “gearbox”, “drive” and “velocity reducer” to be used interchangeably.
A gearbox is any gadget that uses a gear teach to transmit torque/rpm and whatever uses a equipment to transmit torque/rpm is a gearbox.
A right-angle drive is a system with a gear teach that can transmit torque/rpm 90 degrees, to carefully turn a corner
A equipment reducer is a system with a gear teach that may reduce rpm output. A result of decreasing rpm is raising torque at the same ratio speed is reduced.
A gear box may also be a speed increaser
The kind of gear used in the apparatus box defines it as the right angle or an inline drive.
A worm gear drive is a right-angle drive as is a bevel gear
A spur gear drive is inline
A helical gear is inline but may also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It can be a 1 to at least one 1 ratio or a multiple of just one 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it is a right-angle drive. If the ratio is usually greater than 1:1 it is a right-angle swiftness reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outdoors contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Very easily slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for high performance
Built-in 5 sizes with three types of output shaft : hollow, projecting or double-extended. Moreover, yet another output shaft could be installed opposite to the input shaft.
Three input types are available : with projecting input shaft, with pre-manufactured motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to ensure rigidity and machined on all areas for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.
The mechanism of the gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 made of steel.
The use of high quality bearings on all of the axis ensures extended life to the gearbox and allows high radial and axial loads.
Gearbox housing, flanges, bells and covers are externally painted with BLUE RAL 5010.