T series spiral bevel gear steering box
时间：2018-10-28 11:14 tags: Gearbox
Product overview of T series spiral bevel gear steering box:
1. Chassis: Cast iron with high rigidity FC-25;
2. Gear: Made of high-quality and high-purity alloy steel 50CrMnT quenched and tempered, carburized, quenched and ground;
3. Main shaft: It is made of high-quality and high-purity alloy steel 40Cr quenched and tempered, and has the ability to suspend heavy loads.
4. Bearings: equipped with cone roller bearings with heavy load capacity;
5. Oil seal: Imported double lip oil seal is used, which has extremely high dust and oil leakage resistance.
Performance characteristics of T series spiral bevel gear steering box:
1. T series spiral bevel gear steering box is standardized and multi-variety, all speed ratios are actual transmission ratios.The average efficiency is 98%.
2. Spiral bevel gear steering box has single shaft, double horizontal shaft, single vertical shaft and double vertical shaft for selection.
3. The gear steering box can run forwards and backwards, the low-speed or high-speed transmission is stable, and the noise is low, the vibration is small, and the bearing capacity is large.
4. When the speed ratio is not 1:1, the horizontal axis input and vertical axis output are deceleration, and the vertical axis input and horizontal axis output are acceleration.
Technical parameters of T series spiral bevel gear steering box:
速比范围：1:1 1.5:1 2:1 2.5:1 3:1 4:1 5:1；
Torque range: 11.2 — 5713 Nm;
Power range: 0.014-335 kW.
- Previous:Nothing
- Next:Cross diverter